Thursday, July 30, 2009

Learn. How to Make Napkin Rings Out of Paper Towel Rolls

The guest blogger today is Nova, Glass Half Full Gal. We follow each other on twitter and have all sorts of crafty conversations! Nova's so crafty she did about 8 different crafts before settling on this one. Enjoy!

IMG_0299I love to reuse and recycle. Though, where we live in the country a convenient recycling program. So, I'm bigger on reusing items. I think everyone can come up with a use for empty paper towel holders. The most common is probably binoculars. My son has created them on his own quite often.

Napkin ring holders are a great craft that kids can participate in making. Hosting a family dinner or event? Crafts like this keep the kids busy while you tend to the menu and are decorative table art too!

For my summer napkin ring holders, I'm using a ladybug to decorate the top of the ring. If you have a die cut for this pattern, it will make things a snap.

IMG_0300 Supplies:

Empty paper tower roll (this will make 7 napkin rings at 1 1/2 inches in length)

White acrylic paint

Cardstock: Black, Red

Ladybug die cut (or cut out manually)

Hole-punch (if you don't have a die cut)

Black or silver pipe cleaner (chenille sticks)

Googlie eyes (optional)

Cut your empty paper towel holder at 11/2 inch increments to make 7 rings.

Paint your napkin ring holders with acrylic paint. I prefer white, however, the color may vary depending on how you plan to decorate your ring.

Cut one black circle and one red circle for each ladybug body. I used my Sizzix Originals Circles #2 die to cut a circle at about 1 3/4 inches in diameter. I then used the smallest circle on the die to cut out two black circles for heads (about 3/4" in diameter).

IMG_0298Cut out a triangular section for the wings on one side of each of the red circles. Punch two holes on each wing for each red ladybug body. I used a larger hole-punch for the back and a smaller for the front. These make the black spots on the ladybug. Adhere the red body circle to the solid black body circle. I used 'sticky do' foam dimensional adhesives to give the ladybug some dimension. You can paint eyes on your ladybug head or leave black. I used googlie eyes on mine for a fun affect for the kids.

Cut a piece of chenille stick about an inch long. I folded the ends to make the tips of the antennae and then folded the piece in half. Attach to the back of the ladybug head. Attach the head to the body. Now, simply use craft glue or an adhesive of your preference to attach the ladybug to the painted napkin ring.

Other ideas you can do are to adhere jewels, or paint an initial as a monogram. Decorate with patterned designs with glitter glue. Wrap ribbon around the ring to fancy it up at bit.

I did a few of these for demonstration. The options are endless!

Nova Ordner a/k/a Glass Half Full, formerly owned and ran a Litigation Record Procurement Company for 12 years. Currently, she is a Household Manager, mother of two children and wife to a farmer. Nova is also proud to be a Team Writer for Root & Sprout. She's an optimist who sees life from the greener side. She's a Glass Half Full Gal.

Labels: , , , , , ,

Related Posts Widget for Blogs by LinkWithin
Bookmark and Share

Wednesday, July 29, 2009

Make. Filet Crochet Table Runner.

I'm recycling some of my older craft related posts while I'm at the Craft & Hobby Trade Show. Enjoy!

I made this table runner probably 10 years ago. This was before I knew how to knit and sew. I was all about the crochet. It is the perfect size for the top of our piano, so this is where I keep it.

I graphed out the pattern on my own using an alphabet from a book and the edging was from a book also. I wish I knew what book I used. There are so many great resources out there for alphabets and filet crochet edgings that I'm sure if you want to try something like this, you'll be able to find something you like.




I don't remember how long it took me to make this but I do remember being glad when I was finished. At around this same time I made a wall hanging for my mom that says, "Families are Forever".

This is one of those things that I will keep forever. Do you have something you made that you will never throw out or give away?

Labels: , , , , ,

Related Posts Widget for Blogs by LinkWithin
Bookmark and Share

Monday, July 27, 2009

Learn. How to Weave a Chair Seat With Fabric.

Meet Lisa, our guest blogger for today! I know Lisa from my local knitting group. She's super funny and always has the best stories from her adventures in teaching Kindergarten. Enjoy this post from her!

My name is Lisa. I'm a teacher, knitter, quilter, and all around crafter. During the summer months, I tend to find myself neck deep in ongoing projects and I blog about them here.
A month or so ago I found a chair for sale. It was a beautiful wooden number with a rattan seat. The seat needed reworking (which I had never done) but the chair itself was sturdy and had such beautiful lines, I couldn't pass it up.
I knew I had to repair the seat, but wasn't sure how. After walking through my favorite fabric store ever, The Cosmic Cow, and drooling on a new fabric I was considering eloping with, the idea came to me. I'd incorporate the print into the seat.

  • Here's what you need:
  • 100 feet cotton clothesline cording (must be cotton)
  • 2 yards of fabric (pre-cut jelly rolls purchased from quilting stores will work if you're not interested in taking the time to cut the strips)
  • matching cotton thread
  • sewing machine
  • ironing board & iron
  • chair

After cutting the fabric into 2 1/2 inch strips, iron them as if they were bias tape (folding the cut strip in half the long way and ironing), open the strip, fold each half in half again and iron. (you will have four equal sections after final ironing) This will hide the long side raw edges.
Next, you will wrap each ironed strip around the clothesline cord like a burrito. I found it easiest to position the cording in the center of the strip, folding the right half over first, followed by the left. Make sure to fold the beginning of each strip over to hide the short side raw edges and sew down the center of the wrapped cording using a straight stitch.
For my chair, I used the entire 100 foot strand of cording.


Below are pictures of the 'naked' chair and the different stages of weaving.

Here is the chair sans webbing. It received a good scrubbing then I stained the dowels in case any of them showed through after installing the new seat.



Prior to securing cording to the chair, I found the half-way point on the cording and marked it. I wanted to make sure I had enough for both sides of the chair.


I stapled the cording to the bottom of the dowel using a staple gun.


I wrapped the cording around the chair tightly. You can see the rope I used to mark the 1/2 way point. I decided that if I ran out of cording before finishing wrapping in one direction, I would space it out evenly. Fortunately, that didn't happen.



I stapled the cording to the chair and cut. Using the same wrapping method, wrap the chair in the opposite direction but weave as you go. I made sure to weave the upper and lower part of the seat. Pull tightly as you go. I figured the fibers would loosen the more the chair was used.

This part is not for weak fingers. My fingers began to get sore trying to squeeze as many weaves as I could into the seat. I would up getting a knitting needle and using it to help me pull the cording. The end of the needle (not the point) was great for hooking the cord when the space got too small for my fingers.

When I couldn't weave another row, I spaced the cording out evenly in both directions.


This is my favorite craft project of the summer. It was lots of fun to do. If you have any questions, please feel free to contact me via my blog and I'll do my best to answer them. Have fun!

Labels: , , , , , , , , ,

Related Posts Widget for Blogs by LinkWithin
Bookmark and Share

Friday, May 22, 2009

Make. Fabric Covered Embroidery Hoop

IMG_2034

Here is a good 2 minute craft project.  I've been wanting to spruce up my craft room a bit but I wanted to do something, you know, crafty.  This idea is not new or novel.  It's not even difficult. 

Get some fabric and some embroidery hoops.  Put your fabric in the hoops.  Hang them up on the wall.IMG_2035

You can change out the fabric whenever you want. 

Tip:  you can usually find embroidery hoops at garage sales.  Keep an eye out this summer.

Labels: , , , , ,

Related Posts Widget for Blogs by LinkWithin
Bookmark and Share

Friday, March 27, 2009

Paper Punch Storage Idea

I used to store all of my paper punches on a shelf. This quickly invited all the little hands in my house to play with them. They are sturdy enough that I was never worried that they would break, it was just a pain to try and find them again somewhere on my floor. I wanted to mount them somehow on the wall.

A few months ago we remodeled our bathroom and we had a leftover towel bar. We decided to install the towel bar in my craft room because it is the perfect thing to hold my Stampin' UP paper punches.

************************************************************************

Reminder: Today is the last day to buy your April craft challenge packet! Today is also the last day to vote for the winner of March's craft challenge. I will close the poll before I go to bed tonight.

Labels: , , , , , ,

Related Posts Widget for Blogs by LinkWithin
Bookmark and Share

Wednesday, February 11, 2009

Learn. How to Make a Hanging Bouquet from Pottery Barn Kids

Hanging Bouquet Tutorial

I was looking around Pottery Barn Kids online for some ideas for my house. I saw these hanging bouquets and I knew I could make my own! These aren't the kind of supplies I keep around my house so I had to go to a craft store.

Hanging Bouquet Tutorial

Supplies needed:

styrofoam ball
silk flowers (approximately 80-100)
ribbon
safety pin
glue

Everything was on sale and I spent just over $11 for the supplies.

Hanging Bouquet Tutorial

Most silk flowers you can just pull off the stem. These were perfect because there were a lot to a stem and they were multi-colored. The little stem hanging off is perfect to punch into the styrofoam.

Hanging Bouquet Tutorial
Because this is going to be hanging from the ceiling, I didn't do anything more to the flowers than just punch them in every inch or so. If you want them to be a little more permanent, go ahead and dip the stems in glue before pushing them in.

Hanging Bouquet Tutorial

The most difficult part of this project is the hanger. Cut a length of ribbon (doubled). Add a safety pin to join both ends. Dab some glue on there and then stuff the safety pin into the styrofoam.

Hanging Bouquet Tutorial

Let it dry a while before trying to hang your bouquet.

This project was so quick and easy. Your kids could really do it themselves and be creative with the things that put on their bouquet. The options are endless.

Hanging Bouquet Tutorial

I think my daughter will really like having this hang over her bed. Want to make one for your home? Share your finished projects at the flickr group.

Labels: , , , , , ,

Related Posts Widget for Blogs by LinkWithin
Bookmark and Share